Installation must be carried out by a qualified electrician only, in accordance with local electrical regulations.
1. Preparation:
Unpack carefully and check for visible damage. Do not install a damaged fixture.
Confirm all parts are present in the packaging immediately upon receipt.
Check for any damage that may have occurred during shipping.
If any defect or issue is found, contact us before installation.
Keep the protective film on the shades until installation is complete. After fitting and before switching on, carefully remove the protective film.
2. Installation:
Do not apply electrical current to the fixture at any point before or during installation.
Use the appropriate assembly hardware provided.
Ensure the fixture is securely fixed to prevent falling.
3. Wiring:
Connect the wires as instructed: Live (L), Neutral (N), and Earth ⏚.
Ensure all connections are secure and properly insulated.